低分子量苯乙烯-马来酸酐树脂酯化物的制备与应用
Preparation and Application of Low Molecular Weight Styrene-Maleic Anhydride Resin Esterification
刘继强 1胡豪豪 2张春 2李贵东 2徐长安 2罗啟权 1冯逸彬 2胡洋 2杨卓鸿2
作者信息
- 1. 广东三求光固材料股份有限公司,广东 佛山,528200
- 2. 华南农业大学,材料与能源学院,生物基材料与能源教育部重点实验室,广东 广州,510642
- 折叠
摘要
采用溶液聚合法合成了多种低分子量苯乙烯-马来酸酐无规共聚物(SMA),然后加入甲基丙烯酸羟乙酯和催化剂,制备了适用于抗蚀抗电镀油墨领域的低成本酯化树脂(SMAH).探究了不同溶剂、不同单体配比和不同温度条件对SMA分子量的影响.通过分子量测试表明,SMA的分子量受体系溶剂种类、单体配比和反应温度的影响,并且制备的树脂的最低分子量可达 6000 g/mol以下.随后,对应用在油墨中自合成SMAH树脂的各项性能测试表明,阻焊油墨SMAH-3 树脂的显影性、附着力和耐热性指标均正常,且其反射率和耐黄变性分别为86.5 和0.36.因此,SMAH-3 树脂可用于制备阻焊油墨.
Abstract
Firstly,a variety of low molecular weight styryl-maleic anhydride random copolymers(SMA)were synthesized by solution polymerization.Then,by adding hydroxyethyl methacrylate and catalyst,a low-cost esterification resin(SMAH)suitable for corrosion resistant electroplating ink was prepared.The effects of different solvent,monomer ratio and temperature on the molecular weight of SMA were investigated.The molecular weight test showed that the molecular weight of SMA was affected by the type of solvent,monomer ratio and reaction temperature,and the minimum molecular weight of the prepared resin could be below 6000 g/mol.Subsequently,various performance tests on the self-synthesized SMAH resin applied in ink showed that the development,adhesion,and heat resistance indicators of the solder resist ink SMAH-3 resin were normal,and its reflectivity and yellowing resistance were 86.5 and 0.36,respectively.Therefore,SMAH-3 resin could be used to prepare solder resist inks.
关键词
苯乙烯/马来酸酐/阻焊油墨/分子量/溶液聚合Key words
styrene/maleic anhydride/solder resist ink/molecular weight/solution polymerization引用本文复制引用
基金项目
广东省科技项目(2023B0101020002)
广东省科技项目(2022A0505050062)
广东省科技项目(2022A1515240079)
广东省自然资源厅项目(GDNRC[2021]47)
广东省研究生联合培养(佛山)基地扶持项目()
顺德区科技项目(2130218003117)
出版年
2024
国家科技期刊平台
NSTL
万方数据