首页|基于AMESim的脉动灌浆系统建模与特性分析

基于AMESim的脉动灌浆系统建模与特性分析

扫码查看
为了了解脉动灌浆系统的力学特性以及压力等参数的控制特性,通过对脉动灌浆系统组成和工作原理进行分析,基于AMESim仿真平台建立了脉动灌浆系统仿真模型.为了验证模型的正确性,将施工现场监测的输浆管道压力和流量数据与仿真模型的输出数据进行比较.结果表明:该仿真模型能够较为准确地模拟系统的动态曲线变化规律,压力及流量的平均相对误差分别为6.4%、7.6%,验证了模型的正确性.根据灌浆条件的变化,通过仿真模型分析,得到了不同的泵送频率、浆液黏度、管道长度等条件下的浆液管道内压力和流量特性的变化曲线.
Modeling and Characteristic Analysis of Pulsating Grouting System Based on AMESim
In order to understand the mechanical characteristics of the pulsating grouting system and the control characteristic of pressure and other parameters,through the analysis of the composition and working principle of the pulsating grouting system,a simula-tion model of the pulsating grouting system was established based on the AMESim simulation platform.In order to verify the correctness of the model,the pressure and flow data of the slurry pipeline monitored at the construction site were compared with the output data of the simulation model.The results show that the simulation model can accurately simulate the dynamic curves of the system,and the aver-age relative error of pressure and flow are 6.4%and 7.6%respectively,which verifies the correctness of the model.According to the change of grouting conditions,through simulation model analysis,the change curves of the pressure and flow characteristic in the slurry pipeline are obtained under different pumping frequency,slurry viscosity,pipeline length and other conditions.

pulsating grouting systemsystem modelingpressure characteristicflow characteristic

李凤玲、游庆如、彭春雷

展开 >

长沙理工大学汽车与机械工程学院,湖南长沙 410114

湖南宏禹工程集团有限公司,湖南长沙 410000

脉动灌浆系统 仿真建模 压力特性 流量特性

国家自然科学基金青年科学基金项目湖南宏禹工程集团有限公司科研项目

514080692020zkhx041

2024

机床与液压
中国机械工程学会 广州机械科学研究院有限公司

机床与液压

CSTPCD北大核心
影响因子:0.32
ISSN:1001-3881
年,卷(期):2024.52(6)
  • 18