机床与液压2024,Vol.52Issue(7) :129-133.DOI:10.3969/j.issn.1001-3881.2024.07.020

对置端曲面齿轮柱塞泵动态特性仿真研究

Dynamic Characteristics Simulation Study on Opposed End Curve-Face Gear Piston Pump

周凯红 佘东 张奕
机床与液压2024,Vol.52Issue(7) :129-133.DOI:10.3969/j.issn.1001-3881.2024.07.020

对置端曲面齿轮柱塞泵动态特性仿真研究

Dynamic Characteristics Simulation Study on Opposed End Curve-Face Gear Piston Pump

周凯红 1佘东 1张奕1
扫码查看

作者信息

  • 1. 桂林理工大学机械与控制工程学院,广西桂林 541004
  • 折叠

摘要

为了研究对置端曲面齿轮柱塞泵参数对泵动态特性的影响,根据端曲面齿轮柱塞泵工作原理,推导柱塞运动方程.利用Adams与AMESim软件建立对置端曲面齿轮柱塞泵联合仿真模型,通过联合仿真得到不同转速与偏心率下的柱塞泵出口流量与压力的相应曲线.结果表明:转速增大,泵出口流量与压力增大,脉动幅值与脉动频率增大;偏心率增加,泵出口流量与压力增大,脉动幅值增大,脉动频率不变.

Abstract

In order to study the influence of opposed end curve-face gear piston pump parameters on the dynamic characteristics of the pump,the motion equations of the plunger were derived according to the operating principle of the end curve-face gear piston pump.A joint simulation model of the opposed end curve-face gear piston pump was established by using Adams and AMESim software,and the corresponding curves of the outlet flow and pressure of the piston pump at different rotational speeds and eccentricity were obtained by the joint simulation.The results show that as the speed increases,the pump outlet flow and pressure increase,and the pulsation ampli-tude and pulsation frequency increase;as the eccentricity increases,the pump outlet flow and pressure increase,the pulsation amplitude increases,and the pulsation frequency remains unchanged.

关键词

斜盘式轴向柱塞泵/端曲面齿轮/联合仿真/流量与压力脉动

Key words

swash plate axial piston pump/curve-face gear/co-simulation/flow and pressure pulsation

引用本文复制引用

基金项目

国家自然科学基金面上项目(52075110)

广西自然科学基金重点项目(2022JJD160036)

出版年

2024
机床与液压
中国机械工程学会 广州机械科学研究院有限公司

机床与液压

CSTPCD北大核心
影响因子:0.32
ISSN:1001-3881
参考文献量15
段落导航相关论文