机床与液压2024,Vol.52Issue(9) :180-185.DOI:10.3969/j.issn.1001-3881.2024.09.027

基于AMESim的能源冗余电液伺服系统建模及故障模拟仿真

Modeling and Fault Simulation of Energy Redundant Electro-Hydraulic Servo System Based on AMESim

董文勇 纪宝亮 江金林 余三成 房成 李文顶 傅俊勇
机床与液压2024,Vol.52Issue(9) :180-185.DOI:10.3969/j.issn.1001-3881.2024.09.027

基于AMESim的能源冗余电液伺服系统建模及故障模拟仿真

Modeling and Fault Simulation of Energy Redundant Electro-Hydraulic Servo System Based on AMESim

董文勇 1纪宝亮 1江金林 1余三成 1房成 1李文顶 1傅俊勇1
扫码查看

作者信息

  • 1. 上海航天控制技术研究所,上海 201109;上海伺服系统工程技术研究中心,上海 201109
  • 折叠

摘要

针对一种应用于航天领域的能源冗余电液伺服系统,建立了从溢流阀、限流阀、能源选择阀等关键阀门元件到伺服系统的AMESim仿真模型并进行仿真分析,仿真结果与理论设计结果相符.建立双机互联冗余伺服系统仿真模型,对一路溢流阀失效无法建压的典型故障模式进行模拟仿真.结果表明:在该情况下能源选择阀发生了切换,引入另一路能源为伺服机构供油,保证整个系统正常工作,验证了伺服系统能源冗余切换功能原理的正确性.建立的仿真模型具有实际参考价值,也能用于其他故障失效模式下的仿真分析.

Abstract

Aiming at a energy redundant electro-hydraulic servo system applied in aerospace field,the AMESim simulation models of key value components such as relief valve,restrictor valve,energy selective valve and the servo system were established and analyzed.The simulation results are consistent with the theoretical design results.The simulation model of dual interconnected redundant servo sys-tem was established,and the typical failure model mode of one relief valve failure and failure to establish pressure was simulated.The re-sults show that in this case,the energy selection valve is switched,and another energy is introduced to supply fuel to the servo mecha-nism to ensure the normal operation of the whole system,which verifies the correctness of the principle of energy redundancy switching function of the servo system.The simulation model has practical reference value and can also be used for simulation analysis of other failure modes.

关键词

能源冗余/电液伺服系统/AMESim仿真/故障模拟

Key words

energy redundancy/electro-hydraulic servo system/AMESim simulation/failure simulation

引用本文复制引用

出版年

2024
机床与液压
中国机械工程学会 广州机械科学研究院有限公司

机床与液压

CSTPCD北大核心
影响因子:0.32
ISSN:1001-3881
段落导航相关论文