基于电磁多次耦合的盘式磁力耦合器转矩分析
Torque Analysis of Asynchronous Magnetic Coupler Based on Multiple Electromagnetic Coupling
杨超君 1王剑 1杭天 1戚玉堂 1汪奥1
作者信息
- 1. 江苏大学 机械工程学院,江苏镇江 212013
- 折叠
摘要
针对提高盘式磁力耦合器电磁转矩计算精度的问题,引入了多次电磁耦合的等效磁路法,运用安培定律考虑感应电流产生的感应磁场对原磁场的影响,电磁耦合后的磁场产生新的感应电流,新的感应电流又会影响气隙磁场,以此不断循环进行电磁多次耦合直至耦合后的气隙磁通达到精度要求,考虑到三维端部效应,引入Russell-Norsworthy系数对电磁转矩进行修正,最后得到电磁转矩表达式,并将未耦合和多次耦合后电磁转矩的值进行对比;然后通过有限元模拟软件得到磁力耦合器的电磁转矩和机械特性曲线;最后,搭建传动试验平台对电磁转矩进行测量,所得试验结果与理论计算结果、仿真结果较为一致,表明所提出的电磁转矩分析模型的正确性,为进一步研究实心盘式磁力耦合器的传动特性提供参考.
Abstract
Toimprove the calculation accuracy of the electromagnetic torque of eddy-current magnetic couplers with 9 pairs of permanent magnets,the magnetic equivalent circuit(MEC)method based on multiple electromagnetic coupling is established.The Ampere's loop law is applied to analyze the influence of the eddy current reaction magnetic flux on the initial magnetic flux and the influence of the coupled magnetic flux on the eddy current.The multiple electromagnetic coupling is carried out until the accuracy requirements are met and the expressions of the electromagnetic torque are obtained.3D effects are also taken into account to adjust the model.The uncoupled value of the electromagnetic torqueis compared with the value after multiple coupling.Then the electromagnetic torque and mechanical characteristic curves of the magnetic coupler are obtained by finite element simulation.Lastly,the magnetic drive experimental platform is built to measure the electromagnetic torque.The experimental results are in good agreement with the results of theoretical calculation and the simulation analysis,which shows that the formula of torque has high accuracy and can be used as a reference for further research on the transmission characteristics of eddy-current magnetic couplers.
关键词
盘式磁力耦合器/电磁转矩/电磁多次耦合/等效磁路法/感应磁通Key words
eddy-current magnetic couplers/electromagnetic torques/multiple electromagnetic coupling/magnetic equivalent circuit method/induced flux引用本文复制引用
基金项目
国家自然科学基金资助项目(51875254)
出版年
2024
NETL
NSTL
万方数据