考虑中心距安装误差下的齿面磨损特性分析
Analysis of Tooth Face Wear Characteristics under Center Distances Installation Error
孙斌 1王友仁 1高佳豪1
作者信息
- 1. 南京航空航天大学自动化学院,江苏南京 211106
- 折叠
摘要
以重合度为1～2之间的定轴渐开线直齿轮为研究对象,基于Archard磨损模型数值仿真齿面磨损的分布规律,研究齿轮中心距安装误差对齿轮啮合过程的影响,揭示中心距安装误差对齿面磨损的影响机理.结果表明:在0.1％的中心距误差下,中心距的增大会使齿轮的重合度下降,啮合区域变小,啮入点的位置远离齿根,从而减小齿面磨损.
Abstract
Taking fixed-axle involute spur gears with coincidence degree between 1～2 as the research objects,the distribution law of tooth surface wear was simulated numerically based on Archard wear model,the influence of gear center distance on gear meshing process was studied,and the influence mechanism of center distance on tooth surface wear was revealed.The results show that with 0.1％of the center distance error,the increase of the center distance will reduce the gear overlap,make the meshing area smaller and keep the rod position far away from the root,thus reducing the wear on the tooth surface.
关键词
齿面磨损/特性分析/Archard磨损模型/中心距/安装误差Key words
wear of tooth surface/characteristic analysis/Archard wear model/gear center distance/installation error引用本文复制引用
基金项目
航空发动机及燃气轮机重大专项基础研究项目(J2019-1V-0018-0086)
出版年
2024
国家科技期刊平台
NSTL
万方数据