首页|基于Revit平台的隔震支座快速建模模块开发与应用

基于Revit平台的隔震支座快速建模模块开发与应用

扫码查看
原文链接
  • 万方数据
  • 维普
随着隔震技术的推广应用以及建筑业信息化水平的持续提升,在隔震工程中对隔震层建筑信息模型(building infor-mation modeling,BIM)建模的需求逐渐增长,然而针对性的研究工作相对较少.为此,围绕隔震支座BIM模型的高效建模方法和应用模块开展了研究.首先,综合隔震支座应用情况和力学特性,可将其分为橡胶隔震支座、滑移摩擦隔震支座和其他类型隔震支座,据此提出了隔震支座BIM快速建模模块基本架构;随后,基于Revit和Visual Studio平台开发了三类隔震支座BIM模型的快速建模功能,并实现了连接节点参数化建模和支座批量/手动布置的操作功能;最后,开展了某化工公司的库房隔震加固项目的隔震层BIM模型建模实践,结果表明:利用快速建模模块可将隔震层BIM建模操作从7 个步骤降低至2 个步骤,且使用过程中对隔震支座构造细节的认知要求相对较低.同时,建成后的BIM模型与实际工程在建筑信息的多个方面具有较好的一致性.相关研究可为建筑和桥梁隔震工程的BIM建模提供参考和借鉴.
Development and Application of Rapid Modeling Module for Isolators Based on Revit Platform
With the wide application of isolation technique and the continuous improvement of the informatization level of the con-struction industry,the demand for BIM modeling of the isolation layer in isolation engineering is gradually increasing.However,the re-search focused on this area is limited.Therefore,the development and application of efficient modeling module for the seismic isolation bearing BIM model were focused.Firstly,the isolators could be classified into rubber isolators,sliding friction isolators,and other types of isolators based on the application situation and mechanical properties.The basic architecture of the BIM rapid modelling module for seismic isolation bearings was proposed based on the type of bearing.Secondly,the rapid BIM modeling module for these three types of isolators was established on the Revit and Visual Studio platforms,and the operational features of joints'parametric modeling and isolators'batch/manual placement were implemented.Finally,the BIM modeling module was employed to a chemical company warehouse for building the isolation layer.The results show that when utilizing the quick modeling module,the BIM modeling operation of the isolation layer can be reduced from 7 steps to 2 steps,and the cognitive requirements for the specifics of the isolators' construction are relatively low.At the same time,the completed BIM model has good consistency with the actual project in multiple areas of building information.The relevant study provides references for BIM modeling of seismic isolation projects for buildings and bridges.

isolation structureBIM(building information modeling)Revitsecondary developmentautomatic modeling

陈泽云、陈鑫、谈丽华、刘涛、唐柏鉴、孙勇

展开 >

苏州科技大学江苏省结构工程重点实验室, 苏州 215011

中衡设计股份集团有限公司, 苏州 215021

江苏省住房和城乡建设厅, 南京 210036

江苏省建筑科学研究院有限公司,南京 210008

展开 >

隔震结构 建筑信息模型(building information modeling,BIM) Revit 二次开发 自动化建模

国家自然科学基金江苏省高等学校自然科学研究重大项目苏州市科技计划苏州市建设系统科研项目重点项目江苏省研究生科研与实践创新计划

5217829419KJA430019SYG2021132021-2SJCX22_1567

2024

10.12404/j.issn.1671-1815.2300151

科学技术与工程
中国技术经济学会

科学技术与工程

CSTPCD北大核心
影响因子：0.338
ISSN：1671-1815
年,卷(期)：2024.24(2)
  • 15