首页|波浪滑翔器声通机椭圆导流罩减阻性能分析

波浪滑翔器声通机椭圆导流罩减阻性能分析

扫码查看
针对波浪滑翔器声通机载荷减阻问题,设计水声通信机导流罩,并采用流体力学软件分析确定其设计参数;在直航状态下,仿真得到椭圆导流罩最优轴长比;然后在虚拟锚泊状态下优化其前缘长度;最后通过海上试验验证仿真可靠性.结果表明:相比于圆柱形外形,本文提出的导流罩的截面轴长比为 3时,导流罩具有最佳减阻效果;在直线和虚拟锚泊运动时分别减阻82.2%和54%.该研究可为低速(雷诺数为3×105)水声通信机导流罩设计和优化提供参考和借鉴.
ANALYSIS OF DRAG REDUCTION PERFORMANCE OF ELLIPTICAL FAIRINGS FOR WAVE GLIDER HYDROPHONE COMMUNICATOR
To address the wave glider acoustic communicator drag reduction problem,the hydroacoustic communicator fairing is designed and analyzed using hydrodynamic software to determine its design parameters.The optimal axial length ratio of the elliptical fairing is simulated under the direct sailing condition.Then the leading edge length is optimized under the virtual mooring condition.Finally,the reliability of the simulation is verified by the sea test.The results show that compared to the cylindrical shape,the proposed fairing has the best drag reduction effect when the axial length ratio of the cross-section is 3.The drag reduction is 82.2%and 54%during linear and virtual mooring motions,respectively.This study provides reference for the design and optimization of the fairing shield for low-speed(Reynolds number is 3×105)hydroacoustic communicators.

wave glidehydrophone communicatorshape optimizationresistance reduction rate

吴娜、马程议、李灿、孙秀军

展开 >

山东交通学院汽车工程学院,济南 250357

中国海洋大学海洋高等研究院,山东青岛 266100

中国海洋大学物理海洋教育部重点实验室,山东青岛 266100

波浪滑翔器 水声通信机 形状优化 减阻率

国家重点研发计划

SQ2020YFF0426588

2024

力学与实践
中国力学学会 中国科学院力学研究所

力学与实践

CSTPCD
影响因子:0.452
ISSN:1000-0879
年,卷(期):2024.46(2)
  • 14