首页|PEI功能化磁性碳纳米管的制备及其对岩藻多糖的吸附

PEI功能化磁性碳纳米管的制备及其对岩藻多糖的吸附

扫码查看
以碳纳米管和乙酰丙酮铁为原料,采用多元醇法制备聚乙烯亚胺包覆的碳纳米管负载Fe3O4 的复合材料(PEI-CNTs@Fe3O4),并用于岩藻多糖的吸附研究。研究发现,PEI-CNTs@Fe3O4 吸附剂可有效吸附岩藻多糖,反应30 min即可达到吸附平衡。对其吸附机理研究表明:岩藻多糖在PEI-CNTs@Fe3O4 吸附剂表面的吸附更加符合准二阶反应动力学和Langmuir等温吸附模型,结果更倾向于单层化学吸附,且热力学数据表明该吸附反应为吸热反应,在298、308和318 K的温度下其最大吸附量分别可达405。6、415。7和433。0 mg·g-1。在经过3次循环再用的情况下,PEI-CNTs@Fe3O4 对于岩藻多糖的吸附效果依然保持在80%以上。
Preparation of PEI Functionalized Magnetic Carbon Nanotubes and Their Adsorption of Fucoidan
A polyethyleneimine-coated carbon nanotube-loaded Fe3O4 composite(PEI-CNTs@Fe3O4)was prepared by polyol method using carbon nanotubes and iron acetylacetonate,which was used in fucoidan adsorption studies.The study found that the composite adsor-bent can adsorb fucoidan effectively,which can be reached the adsorption equilibrium within 30 min.The study of the adsorption mechanism showed that:The fucoidan adsorption of PEI-CNTs@Fe3O4 was more in line with the pseudo-second-order reaction kinetics and Langmuir isotherm adsorption model,the results were more inclined to monolayer chemi-sorption.Thermodynamic data show that the adsorption reaction was an endothermic reac-tion.At the temperature of 298,308 and 318 K,the maximum adsorption capacity can reach 405.6,415.8 and 433.0 mg·g-1,respectively.The adsorption effect of PEI-CNTs@Fe3O4 adsorbent on fucoidan remained above 80%after three recycling cycles.The new composite material was expected to be widely used in the field of adsorption due to its green and effi-cient adsorption properties.

carbon nanotubesfucoidanadsorptionmagnetic separation

张娇、李娇、王镇、万家齐

展开 >

青岛科技大学 材料科学与工程学院,山东 青岛 266042

碳纳米管 岩藻多糖 吸附 磁性分离

国家自然科学基金项目中国石油科技创新基金研究项目

517740892017D-5007-0607

2024

青岛科技大学学报(自然科学版)
青岛科技大学

青岛科技大学学报(自然科学版)

CSTPCD
影响因子:0.297
ISSN:1672-6987
年,卷(期):2024.45(5)