热加工工艺2024,Vol.53Issue(18) :60-64,68.DOI:10.14158/j.cnki.1001-3814.20221864

TiC添加对A356铝合金组织与力学性能的影响研究

Research on Effects of TiC Addition on Microstructure and Mechanical Properties of A356 Aluminum Alloy

王晓宇 贾金浩 马世卿 王天宇 刘洋 李伯超 蔡政 王春晓 兰紫光
热加工工艺2024,Vol.53Issue(18) :60-64,68.DOI:10.14158/j.cnki.1001-3814.20221864

TiC添加对A356铝合金组织与力学性能的影响研究

Research on Effects of TiC Addition on Microstructure and Mechanical Properties of A356 Aluminum Alloy

王晓宇 1贾金浩 1马世卿 2王天宇 1刘洋 1李伯超 1蔡政 1王春晓 1兰紫光1
扫码查看

作者信息

  • 1. 石家庄铁道大学材料科学与工程学院,河北石家庄 050043
  • 2. 石家庄铁道大学材料科学与工程学院,河北石家庄 050043;石家庄铁道大学交通工程与环境协同发展新材料重点实验室,河北石家庄 050043
  • 折叠

摘要

采用搅拌熔铸法,制备了组织结构均匀的TiC/A356铝合金,研究了 TiC含量对A356铝合金的物相组成、微观组织和力学性能的影响规律.结果表明,随着TiC含量的增加,TiC/A356铝合金的拉伸强度和伸长率呈先上升后降低的规律,维氏硬度则持续上升.当TiC含量为3wt%时,合金的综合性能最佳,其极限抗拉强度为197.1 MPa、伸长率为9.10%、维氏硬度为84.7 HV.此外,还分析了 TiC复合强化A356合金的作用机理模型.

Abstract

TiC/A356 aluminum alloy with uniform structure was prepared by stirring casting method.The effects of TiC content on the phase composition,microstructure and mechanical properties of A356 aluminum alloy were studied.The results show that with the increase of TiC content,the tensile strength and elongation of TiC/A356 aluminum alloy increase first and then decrease,while the Vickers hardness increases continuously.When the content of TiC is 3wt%,the alloy possesses the optimal comprehensive properties,with the ultimate tensile strength 197.1 MPa,the elongation 9.10%,and the Vickers hardness 84.7HV.Furthermore,the mechanism model of TiC compound reinforced A356 alloy was analyzed.

关键词

TiC/A356铝合金/微观组织/力学性能/强化机理

Key words

TiC/A356 aluminum alloy/microstructure/mechanical properties/strengthening mechanism

引用本文复制引用

基金项目

国家自然科学基金资助项目(51804202)

河北省自然科学基金资助项目(E2019210295)

出版年

2024
热加工工艺
中国船舶重工集团公司热加工工艺研究所 中国造船工程学会船舶材料学术委员会

热加工工艺

CSTPCD北大核心
影响因子:0.55
ISSN:1001-3814
参考文献量5
段落导航相关论文