兵器装备工程学报2024,Vol.45Issue(12) :178-186.DOI:10.11809/bqzbgcxb2024.12.022

复合结构药型罩材料配比对射流侵彻性能的影响

The influence of the material ratio of composite liner on the penetration performance of jet

安哲 印立魁 赵晓尧 徐梦林 刘官 韦丽金 张马莉
兵器装备工程学报2024,Vol.45Issue(12) :178-186.DOI:10.11809/bqzbgcxb2024.12.022

复合结构药型罩材料配比对射流侵彻性能的影响

The influence of the material ratio of composite liner on the penetration performance of jet

安哲 1印立魁 2赵晓尧 2徐梦林 3刘官 4韦丽金 5张马莉5
扫码查看

作者信息

  • 1. 中北大学机电工程学院,太原 030051;中北大学智能武器研究院,太原 030051
  • 2. 中北大学智能武器研究院,太原 030051
  • 3. 湖北航天化学技术研究所,湖北襄阳 441003
  • 4. 西安机电信息技术研究所,西安 710065
  • 5. 晋西工业集团有限责任公司,太原 030027
  • 折叠

摘要

为了探究复合药型罩材料配比对射流侵彻性能的影响,数值模拟了铜铝双层复合结构药型罩、铜铝局部复合结构药型罩和铜铝上下复合结构药型罩的射流侵彻靶板的过程,分析了不同材料配比对射流侵彻性能的影响.结果表明,在铜铝双层复合结构中,射流侵彻深度随紫铜层厚度的增加先增大后减小;在铜铝局部复合结构中,射流侵彻深度随紫铜层高度的减少先增大后减小;在铜铝上下复合结构中,射流侵彻深度随紫铜层高度减少而减小.研究结果对复合结构药型罩的结构优化提供了参考.

Abstract

In order to explore the effect of the material ratio of composite liner on the jet penetration capability,the jet penetration of target by Cu-Al double layer composite liner,Cu-Al local composite liner and Cu-Al upper and lower composite liner was simulated numerically,and the influence of different material ratio on the jet penetration performance was analyzed.The results show that the jet penetration depth increases first and then decreases with the increase of copper layer thickness in the Cu-Al double layer composite structure.The jet penetration depth increases first and then decreases with the decrease of copper layer height in Cu-Al local composite structure.The jet penetration depth decreases with the decrease of copper layer height in Cu-Al upper and lower composite structure.The results of this paper provide a reference for structural optimization of composite liner.

关键词

聚能射流/数值模拟/复合药型罩/聚能装药/爆炸力学

Key words

shaped charge jet/numerical simulation/composite charge liner/shaped charge/explosion mechanics

引用本文复制引用

出版年

2024
兵器装备工程学报
重庆市(四川省)兵工学会 重庆理工大学

兵器装备工程学报

CSTPCDCSCD北大核心
影响因子:0.478
ISSN:2096-2304
段落导航相关论文