基于正交试验的高性能排水管注塑成型工艺优化
Optimization of Injection Molding Process for High-Performance Drainage Pipe Based on Orthogonal Test
娄艳华 1周建华1
作者信息
- 1. 濮阳职业技术学院,河南 濮阳 457000
- 折叠
摘要
排水管作为基础设施,其成型质量直接影响居民的生活,因此对排水管的成型质量要求越来越高.以聚氯乙烯(PVC)建筑排水管为研究对象,以熔体温度、保压压力、模具温度和冷却时间4个因素为试验变量,以排水管的翘曲变形量为响应目标,建立L9(34)正交试验.结果表明:熔体温度对制件的翘曲变形影响较大,当熔体温度、模具温度、保压压力以及冷却时间分别为180℃、60℃、70 MPa和10 s时,制件的翘曲变形量相对较小,为2.624 0 mm.通过Moldflow模流分析软件对优化后的工艺参数进行验证,结果达到实际生产要求.
Abstract
Drainage pipes,as infrastructure,have a direct impact on the quality of residents'lives due to their molding quality,which is why the requirements for the molding quality of drainage pipes are becoming increasingly stringent.Taking polyvinyl chloride(PVC)building drainage pipes as the research subject,and considering the melt temperature,holding pressure,mold temperature,and cooling time as four experimental variables,with the warpage deformation of the drainage pipe as the response target,an L9(34)orthogonal test was established.The results indicated that the melt temperature had a significant effect on the warpage deformation of the part.When the melt temperature,mold temperature,holding pressure,and cooling time were set at 180℃,60℃,70 MPa and 10 s,respectively,the warpage deformation of the part was relatively small,at 2.624 0 mm.The optimized process parameters were verified using Moldflow mold flow analysis software,and the results met the actual production requirements.
关键词
建筑排水管/正交试验/Moldflow/翘曲变形/工艺优化Key words
Building drainage pipe/Orthogonal test/Moldflow/Warpage deformation/Process optimization引用本文复制引用
出版年
2024
国家科技期刊平台
NSTL
万方数据