工程与试验2024,Vol.64Issue(1) :56-59.DOI:10.3969/j.issn.1674-3407.2024.01.014

地下行车通道下穿既有公路的数值模拟分析研究

Research on Numerical Simulation Analysis of Underground Traffic Passes Crossing Existing Highways

蔡洪美
工程与试验2024,Vol.64Issue(1) :56-59.DOI:10.3969/j.issn.1674-3407.2024.01.014

地下行车通道下穿既有公路的数值模拟分析研究

Research on Numerical Simulation Analysis of Underground Traffic Passes Crossing Existing Highways

蔡洪美1
扫码查看

作者信息

  • 1. 福建省建设工程物探试验检测中心,福建 福州 350011
  • 折叠

摘要

依托某沿海城市商业广场地下通道下穿既有道路工程,通过有限元分析方法,对因下穿隧道开挖引起的地表变形、支护结构内力变化等量值的影响进行分析.计算结果表明,除少数几个节点处的安全系数不满足规范要求外,隧道二次衬砌支护的整体安全系数满足规范要求;地下通道的最大位移在隧道中线仰拱处,为-32.2mm.因此,地下通道在进行开挖时,要及时支护及施作仰拱,拆衬要选择适当的时机,避免因过量沉降而产生安全问题.

Abstract

Relying on the underground passage of a commercial plaza in a coastal city that passes through the existing road project,the finite element analysis method is used to analyze the influences of the surface deformation caused by the excavation of the underpass and the change of the internal force of the supporting structure.The calculation results show that the overall safety factor of the secondary lining support of the tunnel meets the requirements of the specification except that the safety factor at a few nodes does not meet the requirements of the specification.The maximum displacement of the underground passage is-32.2mm at the inverted arch of the tunnel centerline.Therefore,when the underground passage is excavated,it is necessary to timely support and implement the inverted arch,and the appropriate time should be selected to remove the lining,so as to avoid the safety problems caused by excessive settlement.

关键词

地下通道/二次衬砌/数值模拟/地表沉降

Key words

underground tunnel/secondary lining/numerical simulation/subsidence

引用本文复制引用

出版年

2024
工程与试验
长春试验机研究所有限公司 中国仪器仪表学会试验机分会

工程与试验

影响因子:0.198
ISSN:1674-3407
参考文献量7
段落导航相关论文