首页|基于D-P准则的改良土体强度的分析研究

基于D-P准则的改良土体强度的分析研究

扫码查看
建筑垃圾是我国现阶段存量和产生量均巨大的废弃资源,面临着拓展应用范围的实际需要,通过掺加建筑垃圾再生微粉的方法来提高土体强度,具有很好的应用价值.基于改良土体无侧限抗压强度和直剪试验,结合Drucker-Prager破坏准则,利用ABAQUS二次开发平台,开发了岩土用户材料子程序UMAT.在二次开发平台中对试验的改良土体的强度进行了预测分析,研究分析中间主应力、拉应力和静水压力对土体力学性能的影响考虑不足的情况.将二次开发平台中的预测结果与岩土试件的无侧限抗压试验结果进行对比验证,获得适合的再生微粉掺量可提高土体强度.结果表明:当再生微粉掺量为15%时可有效提高土体强度,并且二次开发程序可以很好地描述与预测改良土的力学性能,可以为建筑垃圾再生材料在生土工程中的应用提供了一定指导.
Strength Prediction of the Modified Soil Using on D-P Criterion
The reinforcement of geotechnical materials plays an important role in the durability and safety of buildings.The construction waste is a huge,wasted resource and is currently largely produced in China.To improve the strength,the recycled powder construction waste is added to the soft soil.Based on the unconfined compressive strength test and the direct shear test of modified soil,re-developed constitutive model that combined with Drucker-Prager criterion is established by using platform ABAQUS platform.The geotechnical user material subroutine UMAT was used to predict the strength of the modified soil.The new constitutive model considers the influence of intermediate principal stress,the tensile stress and the hydrostatic pres-sure on the mechanical properties of the soil.The prediction results by the re-development platform are compared with the un-confined compression test results the soil specimens.Combined with the test and verification results,the appropriate amount of recycled powder was obtained to improve the soil strength.The results show that,it is beneficial to increase the strength of soil when the content of reclaimed fine powder is about 15%.This subroutine command of ABAQUS can be used to describe and to predicte the mechanical properties of the modified soil well.

Modified SoilDrucker-Prager CriterionUnconfined Compressive StrengthConstitutive Model

王晓娇、周理安、戚承志、陈昊祥、焦伟玲、林坤

展开 >

中航建设集团有限公司,北京 101407

北京建筑大学,北京 100044

福州市规划设计研究院集团有限公司,福州 350108

改良土体 Drucker-Prager准则 无侧限抗压强度 本构模型

2024

土工基础
湖北省土木建筑学会,中国科学院武汉岩土力学研究所,武汉市土木建筑学会

土工基础

影响因子:0.238
ISSN:1004-3152
年,卷(期):2024.38(6)