首页|全固态无负极锂金属电池纳米化复合集流体构筑

全固态无负极锂金属电池纳米化复合集流体构筑

扫码查看
原文链接
  • 国家科技期刊平台
  • NETL
  • NSTL
  • 万方数据
全固态无负极锂金属电池(AFSSLB)是一种通过初次充电形成金属锂负极的新型锂电池,它的负极与正极容量比为1,能使任意锂化正极系统达到最大能量密度.无机固态电解质的引入使无负极锂金属体系兼具高安全性.然而,电池循环过程中的锂离子通量不均导致的界面接触损失和锂枝晶生长会不断加剧,从而造成电池循环容量迅速衰减.本文构筑了纳米化的银碳复合集流体,显著增强了全固态无负极锂金属电池中集流体-电解质界面的性能.使用该集流体的固态电池循环过程中接触良好,界面阻抗为～10 Ω·cm-2.从而实现了超过7.0 mAh·cm-2锂金属的均匀稳定沉积,并在0.25 mA·cm-2的电流条件下实现循环200次以上.
Nanocomposite Current Collectors for Anode-Free All-Solid-State Lithium Batteries
The anode-free solid-state lithium battery(AFSSLB)is a type of lithium battery that utilizes an initial charging process to generate lithium metal as the anode.With a 1:1 anode-to-cathode capacity ratio,it enables any lithiated cathode system to achieve a maximal energy density.Furthermore,the incorporation of inorganic solid electrolytes in the AFSSLB greatly enhances its intrinsic safety.However,the AFSSLB faces challenges related to interfacial issues between the electrolyte and collector.During the cycling process,uneven lithium-ion flux can result in contact loss and dendrite growth,ultimately leading to rapid battery failure.Addressing these interfacial problems is crucial for the successful implementation and performance of AFSSLBs.The absence of initial lithium metal material prevents the battery system from accommodating additional lithium through a modified anode.Instead,it relies on high Coulomb efficiency during cycling.Consequently,ensuring continuous and uniform contact at the anode interface is crucial for maintaining the reversibility of lithium deposition.Herein,a nanocomposite current collector is introduced to enhance the interface between the collector and electrolyte in AFSSLB.In this approach,silver nanoparticles are dispersed within the carbon materials to construct a composite current collector.The incorporation of the silver-carbon nanocomposite layer results in a low interfacial impedance of 10 Ω·cm-2,indicating that the electrolyte-collector interface maintains contact throughout the charging and discharging processes.The focused ion beam(FIB)technology and electron microscopy were employed to analyze the battery cross sections,revealing that lithium metal could be deposited in a thickness of more than 25 μm without short-circuiting using this silver-carbon nanocomposite current collector.The solid-state batteries equipped with nanocomposite current collectors exhibited an enhanced dissolution of silver in the lithium metal,leading to the formation of abundant lithiophilic sites.The nanocomposites facilitate the rapid transfer of Li atoms within the anodes,thus achieving uniform lithium metal deposition.Theoretical analysis using the nucleation equation demonstrates that using nano-silver as a current collector can reduce the nucleation work required for deposition by at least four orders of magnitude.The smaller nucleation force contributes to the uniform and stable deposition of lithium metal during continuous cycling.The solid-state batteries demonstrated improved interfacial contact,resulting in the uniform and stable lithium metal deposition of over 7.0 mAh·cm-2 for more than 200 cycles at 0.25 mA·cm-2.The cycling performances of all-solid-state batteries can be significantly improved through the design of nanocomposite collectors.This presents an effective strategy for advancing the practical implementation of all-solid-state lithium metal batteries,particularly those utilizing an anode-free configuration.

All-solid-state batteryAnode-free rechargeable batteryNanocomposite current collectorInterfacial contactLi metal battery

刘泽宇、黄文泽、肖阳、张俊东、孔伟进、武鹏、赵辰孜、陈爱兵、张强

展开 >

清华大学化学工程系,绿色化学反应工程与技术北京市重点实验室,北京 100084

清华大学致理书院,北京 100084

清华大学探微书院,北京 100084

宝马(中国)服务有限公司,北京 101318

河北科技大学化学与制药工程学院,石家庄 050018

展开 >

全固态电池 无负极锂金属二次电池 纳米集流体 界面接触 锂金属电池

国家重点研发计划国家自然科学基金河北省科技计划博士后国际交流计划引进项目

2021YFB25003002210815122344402DYJ20210125

2024

10.3866/PKU.WHXB202305040

物理化学学报
中国化学会

物理化学学报

CSTPCD北大核心
影响因子：0.951
ISSN：1000-6818
年,卷(期)：2024.40(3)
  • 47