有机硅材料2024,Vol.38Issue(1) :37-40.DOI:10.11941/j.issn.1009-4369.2024.01.008

导热硅脂高温稳定性评价研究

Study on High Temperature Stability Evaluation of Thermal Conductive Silicone Grease

刘建峰 邓智 谢晓霞 陈淑云
有机硅材料2024,Vol.38Issue(1) :37-40.DOI:10.11941/j.issn.1009-4369.2024.01.008

导热硅脂高温稳定性评价研究

Study on High Temperature Stability Evaluation of Thermal Conductive Silicone Grease

刘建峰 1邓智 1谢晓霞 1陈淑云1
扫码查看

作者信息

  • 1. 珠海格力电器股份有限公司,广东珠海 519070
  • 折叠

摘要

以5种市售导热硅脂(A、B、C、D、E)为研究对象,考察了其在常温、100℃处理720 h、150℃处理720 h条件下的性能差异.结果表明,常温条件下导热硅脂D的导热性能最高;100℃处理720 h后,导热硅脂C的热导率、热阻变化率最小,在100℃时稳定性最好;150 ℃处理720 h后,导热硅脂C出现硬化现象,在150 ℃时稳定性不佳,导热硅脂A、B、D、E稳定性较佳;在实践中应根据导热硅脂的服役环境合理选型.

Abstract

The performance differences of five commercially available thermal conductive silicone grease(A,B,C,D,E)were investigated under room temperature,100 ℃ for 720 h or 150℃ for 720 h,respectively.The results show that grease D has the highest thermal conductivity at room temperature.The high temperature stability of grease C treated at 100 ℃ for 720 h is the best because of its small change in thermal conductivity and resistance,but it appears harden and poor stability at 150 ℃ for 720 h.Grease A,B,D and E have good stability under the temperature of 150 ℃.Which grease shall be chosen depends on the service environment.

关键词

导热硅脂/热导率/高温稳定性/硬化/热阻

Key words

thermal conductive silicone grease/thermal conductivity/high temperature stability/harden/thermal resistance

引用本文复制引用

出版年

2024
有机硅材料
中国氟硅有机材料工业协会 中蓝晨光化工研究设计院有限公司 国家有机硅工程技术研究中心

有机硅材料

CSTPCD
影响因子:0.778
ISSN:1009-4369
参考文献量11
段落导航相关论文