岩土工程技术2024,Vol.38Issue(3) :365-373.DOI:10.3969/j.issn.1007-2993.2024.03.016

PFC3D颗粒流模拟纳米黏土改良黄土三轴试验

PFC3D Particle Flow Simulation of Nano-Clay Modified Loess Triaxial Test

张子萱 曹宝花 韩泽敏 许江波 程芳卉 陈绍华 侯鑫敏 詹皓辰
岩土工程技术2024,Vol.38Issue(3) :365-373.DOI:10.3969/j.issn.1007-2993.2024.03.016

PFC3D颗粒流模拟纳米黏土改良黄土三轴试验

PFC3D Particle Flow Simulation of Nano-Clay Modified Loess Triaxial Test

张子萱 1曹宝花 2韩泽敏 1许江波 1程芳卉 3陈绍华 3侯鑫敏 4詹皓辰3
扫码查看

作者信息

  • 1. 长安大学公路学院,陕西西安 710064
  • 2. 长安大学公路学院,陕西西安 710064;西安长大公路工程检测有限公司,陕西西安 710064
  • 3. 中铁第一勘察设计院集团有限公司,陕西西安 710043
  • 4. 长安大学公路学院,陕西西安 710064;中铁第一勘察设计院集团有限公司,陕西西安 710043
  • 折叠

摘要

基于PFC3D软件研究不同纳米材料、掺量、围压、干密度对改良黄土力学性能的影响,确定改良黄土宏细观之间的参数关系,通过建立改良黄土数值模型、三轴试验,获得了改良黄土的应力-应变曲线.将数值模拟的结果与室内试验的结果相比较,通过数值模拟和室内三轴试验,得出的改良黄土抗剪强度指标基本吻合.试验结果表明:(1)围压一定时,改良黄土试样偏应力随纳米黏土掺量的增加而增大;改良黄土的应力与应变正相关,不同围压时,表现为软化型和强硬化型;(2)当凹凸棒土掺量小于 2%时,数值模拟得到的抗剪强度总体小于室内试验得到的抗剪强度,材料大于 2%时则相反;(3)纳米蒙脱土改良黄土数值试样材料掺量小于等于 4%时,数值模拟得到的抗剪强度大于室内试验的抗剪强度,大于 4%则相反.

Abstract

PFC3D software was used to study the influence of different nanomaterials,dosage,confining pressure,and dry density on the mechanical properties of improved loess,and determine the parameter relationship between macro and meso of im-proved loess.Through a numerical model of improved loess and a three-axis experiment,the stress-strain curve of improved loess was obtained.The results of the numerical simulation were compared with the results of indoor experiments,and the shear strength index of improved loess was consistent.The experimental results showed that:(1)When the confining pressure is constant,the deviatoric stress of the improved loess sample increases with the increase of nano-clay content.The stress and strain of the improved loess are posit-ively correlated.When the confining pressure is different,it shows a softening type and a strong hardening type.(2)When the content of attapulgite is less than 2%,the shear strength obtained by numerical simulation is generally lower than that derived from laboratory tests;conversely,when the content exceeds 2%,the situation is reversed.(3)When the content of nano-montmorillonite modified loess in numerical test samples is less than or equal to 4%,the shear strength obtained through numerical simulation is higher than that meas-ured in laboratory tests;conversely,when the content exceeds 4%,the situation is reversed.

关键词

凹凸棒土/纳米蒙脱土/改良黄土/三轴试验/PFC3D颗粒流模拟试验

Key words

attapulgite/nano-montmorillonite/improved loess/triaxial test/PFC3D particle flow simulation test

引用本文复制引用

出版年

2024
岩土工程技术
国防机械工业工程勘察科技情报网 中兵勘察设计研究院

岩土工程技术

CSTPCD
影响因子:0.387
ISSN:1007-2993
参考文献量14
段落导航相关论文