首页|基于电流路径重构的无桥三电平PFC电路研究

基于电流路径重构的无桥三电平PFC电路研究

扫码查看
文中提出一族电流路径重构的无桥三电平功率因数校正(power factor correction,PFC)电路,该族拓扑在无桥PFC的基础上,重构电流路径以减少电流路径中的功率器件,并保留无桥结构可靠性高和三电平结构器件应力低的优点.该族电路的任一工作模态仅需一个全控器件,有效降低全控器件损耗和电路控制复杂度.基于该族电路的工作原理分析,推导各器件应力、电压电流纹波与调制度的关系,利于元器件相关参数的设计,同时可推广到三电平电路拓扑的设计过程中;另外,设计该族电路调制技术及控制策略;最后,搭建实验样机,实验结果证明,该拓扑推衍方案的可行性和该族电路拓扑的有效性.
Research on Bridgeless Three-level PFC Circuit Based on Current Path Reconstruction
In this paper,a family of bridgeless three-level power factor correction(PFC)circuits based on current path reconstruction is proposed.Based on the bridgeless PFC,this family of topologies reconstructs the current path to reduce the power devices while retaining the high reliability of the bridgeless structure and the low stress of the three-level circuit devices.In any working mode of this circuits,at most one is needed to fully control device works,which effectively reduces the device loss and control complexity of this circuits.According to the analysis of the working principle of the proposed circuit,the relationship between the stress,voltage,and current ripple of each device and the modulation index is derived,which is conducive to the design of relevant parameters of the components and can be extended to the design process of three-level topology.In addition,the modulation techniques and control strategies are designed for this circuits.Finally,an experimental prototype is built,and the experimental results demonstrate the feasibility of the topology derivation scheme and the effectiveness of the family of circuit topologies.

bridgelessthree-leveltopology derivationcircuit parameter design

马辉、邹旭、范家宁、卢云、徐恒山、黄悦华

展开 >

三峡大学电气与新能源学院,湖北省 宜昌市 443002

梯级水电站运行与控制湖北省重点实验室(三峡大学),湖北省 宜昌市 443002

无桥 三电平 拓扑推演 电路参数设计

2024

中国电机工程学报
中国电机工程学会

中国电机工程学报

CSTPCD北大核心
影响因子:2.712
ISSN:0258-8013
年,卷(期):2024.44(10)
  • 21