首页|广东省重点行业高强度噪声频谱特征分析

广东省重点行业高强度噪声频谱特征分析

扫码查看
目的 分析广东省重点行业高强度生产性噪声的频谱分布特征.方法 采用分层抽样方法,选择广东省21个地级市2 806家企业为研究对象,对工作场所进行现场调查,测量工作场所和工作岗位噪声,并测量噪声声压级≥85.0dB(A)工作场所的噪声频谱.结果 共监测30个重点行业的23 076个工作场所噪声和20 969个工作岗位噪声;工作场所噪声声压级中位数(M)和第25、75百分位数(P25,P75)为82.3(78.6,86.5)dB(A),噪声超标率为30.4%;工作岗位噪声声压级M(P25,P75)为78.6(70.0,83.5)dB(A),噪声超标率为18.0%;工作场所和工作岗位噪声超标率呈正相关(Spearman相关系数=0.86,P<0.01).工作岗位噪声超标率≥25.0%的重点岗位噪声超标率为46.5%,相应工作场所噪声超标率为58.1%.共监测5 636个工作场所噪声声压级>85.0 dB(A)的场所的噪声频谱,结果显示,数量最多的噪声源为打磨机(441个),噪声源平均噪声声压级最大的为筛分机[93.0 dB(A)].聚类分析结果显示,主要噪声源可分为3类,包括:除8 000.0 Hz外各频段均>80.0 dB的宽频型噪声;噪声声压级最大的频段在1 000.0、2 000.0和4 000.0 Hz且低频<75.0 dB的中高频型噪声;500.0 Hz以下且噪声声压级均>85.0 dB的中低频型噪声.结论 广东省重点行业工作场所中的工作岗位噪声超标率较高,涉及行业广泛,其对应的噪声源噪声声压级较高且频谱特征明显.可根据不同的频谱特征和大小制定相应的噪声治理策略.
Analysis on spectrum characteristics of high-intensity noise in key industries in Guangdong Province
Objective To analyze the spectrum distribution characteristics of high-intensity productive noise in key industries in Guangdong Province.Methods A total of 2 806 enterprises in 21 prefecture-level cities in Guangdong Province were selected as the study subjects using the stratified sampling method.On-site investigations were conducted in workplaces.Noise in workplaces and work-sites,and the noise spectrum of the workplaces with sound pressure level ≥85.0 dB(A)were detected.Results The noise of a total of 23 076 workplaces and 20 969 work sites from 30 key industries were monitored.The median(M)and 25th and 75th percentiles(P25,P75)of workplace sound pressure level were 82.3(78.6,86.5)dB(A).The rate of the noise exceeded national standard was 30.4%.The sound pressure level M(P25,P75)of work-site was 78.6(70.0,83.5)dB(A).The rate of the noise exceeded national standard was 18.0%.Workplace noise and work site noise were positively correlated(Spearman correlation coefficient=0.86,P<0.01).The rate of the noise exceeded national standard was 46.5%in key work sites where the rate of noise exceeded the national standard was ≥25.0%,and corresponding rate of the workplace noise exceeded national standard was 58.1%.The noise spectrum result of 5 636 workplaces sound pressure level>85.0 dB(A)showed that most of the noise source was from grinding machines(441 cases),and the highest average sound pre(s)sure level of noise source was from screening machines[93.0 dB(A)].Cluster analysis results showed that the main noise sources could be divided into three categories,including wideband noise with levels>80.0 dB in all frequency bands except 8 000.0 Hz,medium-high-frequency noise with the highest sound pressure level at 1 000.0,2 000.0,and 4 000.0 Hz and low frequencies<75.0 dB,and medium-low-frequency noise below 500.0 Hz with sound pressure level>85.0 dB.Conclusion The rate of the noise exceeded national standard in workplace of key industries in Guangdong Province is high,involving a wide range of industries,with high sound pressure levels and obvious spectrum characteristics of corresponding noise sources.Corresponding noise control strategies can be formulated based on different spectrum characteristics and magnitudes.

Key industriesNoiseCharacteristicsSpectrumHigh intensityWorkplaceWork site

郭建宇、徐国勇、何智鹏、严茂胜、蒋雍建、晏华、肖斌

展开 >

广东省职业病防治院,广东广州 510300

重点行业 噪声 频谱 特征 高强度 工作场所 工作岗位

广州市科技计划项目

201904010268

2024

中国职业医学
中华预防医学会 华南区域劳动卫生职业病防治中心

中国职业医学

CSTPCD
影响因子:1.011
ISSN:2095-2619
年,卷(期):2024.51(2)
  • 10