首页|2304节约型双相不锈钢的高温拉伸塑性研究

2304节约型双相不锈钢的高温拉伸塑性研究

扫码查看
采用Gleeble-3500型热模拟试验机在加热温度为750~1150 ℃下,对2304节约型双相不锈钢进行高温拉伸研究。采用扫描电镜和EBSD分析检测手段对断口进行分析。并借助Thermo-calc软件对2304平衡相图进行计算。结果表明,在750~1150℃的温度范围,随着温度升高断面收缩率依次增大,峰值应力依次减小,应力主要分布在奥氏体相中。2304双相不锈钢在950~1150℃的温度范围具有较好的高温热塑性,断口处主要以韧窝为主,为典型的韧性断裂。温度升高和奥氏体含量减少这两个因素导致热塑性良好。
Research on elevated temperature tensile ductility of 2304 economical duplex stainless steel
The high temperature tensile behavior of 2304 economical duplex stainless steel was studied in the temperature of 750~1150℃ by using Gleeble-3500 thermal simulation machine.The fracture surface was analyzed using scanning electron microscopy and EBSD analysis detection methods.The equilibrium phase diagram of 2304 duplex stainless steel were calculated by Thermo-calc software.The results show that within the temperature range of 750~1 150 ℃,the cross-sectional shrinkage rate increases sequentially with the increase of temperature,and the peak stress decreases sequentially.The stress is mainly distributed in the austenite phase.2304 duplex stainless steel has good high-temperature thermoplasticity in the temperature range of 950~1 150 ℃,and the fracture surface is mainly composed of ductile dimples,which is a typical ductile fracture.The two factors of temperature increase and decrease in austenite content lead to good thermoplasticity.

economical duplex stainless steelhigh-temperature tensionhot ductilitymicrostructure

陈兴润、王长波、赵得江、钱张信、惠恺、潘吉祥

展开 >

酒钢集团宏兴钢铁股份有限公司,甘肃嘉峪关 735100

节约型双相不锈钢 高温拉伸 热塑性 组织

2024

重型机械
中国重型机械研究院股份公司

重型机械

影响因子:0.213
ISSN:1001-196X
年,卷(期):2024.(5)