首页|Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation

Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation

扫码查看
原文链接
  • NETL
  • NSTL
  • Elsevier
Objectives. A validated numerical model for stress/strain predictions is essential in understanding the biomechanical behavior of implant-supported dental prostheses. The digital image correlation (DIC) method for full-field strain measurement was compared with finite element analysis (FEA) in assessing bone strain induced by implants. Methods. An epoxy resin model simulating the lower arch was made for the experimental test with acrylic resin replicas of the first premolar and second molar and threaded implants replacing the second premolar and first molar. Splinted (G1/G3) and non-splinted (G2/G4) metal-ceramic screw-retained crowns were fabricated and loaded with (G1/G2) or without (G3/G4) the second molar that provided proximal contact. A single-camera, two-dimensional DIC system was used to record deformation of the resin model surface under a load of 250 N. Three-dimensional finite element (FE) models were constructed for the physical models using computer-aided design (CAD) software. Surface strains were used for comparison between the two methods, while internal strains at the implant/resin block interface were calculated using FEA. Results. Both methods found similar strain distributions over the simulant bone block surface, which indicated possible benefits of having splinted crowns and proximal contact in reducingbone strains. Internal strains predicted by FEA at the implant-resin interface were 8 times higher than those on the surface of the model, and they confirmed the results deduced from the surface strains. FEA gave higher strain values than experiments, probably due to incorrect material properties being used. Significance. DIC is a useful tool for validating FE models used for the biomechanical analysis of dental prosthesis.

Digital image correlationFinite element analysisStrain analysisDental implantsDental prosthesis

Rodrigo Tiossi、Marco A.A. Vasco、Lianshan Lin、Heather J. Conrad、Osvaldo L. Bezzon、RicardoF. Ribeiro、AlexS.L. Fofe

展开 >

Department of Dental Materials and Prosthodontics, Dental School o/Ribeirao Preto, University of Sao Paulo, Ribeirao Preto, SP, Brazil

Minnesota Dental Research Center for Biomaterials and Biomechanics, School 0f Dentistry, University 0f Minnesota, Minneapolis, MN,USA

Department of Restorative Sciences, School 0/Dentistry, University 0/Minnesota, Minneapolis, MN, USA

2013

10.1016/j.dental.2013.04.010

Dental materials

Dental materials

SCI
ISSN：0109-5641
年,卷(期)：2013.29(7)
  • 24
  • 38