首页期刊导航|Key engineering materials
期刊信息/Journal information
Key engineering materials
Trans Tech Publications Ltd.
Key engineering materials

Trans Tech Publications Ltd.

半月刊

1013-9826

Key engineering materials/Journal Key engineering materials
正式出版
收录年代

    Development of Intermediate-Temperature Solid Oxide Fuel Cells Using Doped Lanthanum Gallate Electrolyte

    Hiroyuki EtoTaner AkbayJun AkikusaGakuji Uozumi...
    340-343页
    查看更多>>摘要：Intermediate-temperature(IT) solid oxide fuel cells(SOFCs) were developed using lanthanum gallate electrolyte, samarium cobaltite cathode and the cermet anode of nickel and ceria. High efficiency operation below 800℃ was enabled using planar disk type cells with unique seal less stack design. The first 10 kW-class combined heat and power (CHP) system provided AC output power of 10 kW with electrical and overall efficiency of 41 and 82 %HHV, respectively. Optimization of cell-stack components to increase the output power density is in progress.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Fabrication and Characterization of Organic Semiconductor Based Gas Sensor

    Munirah AtiqueGhulam ShabbirMazhar Mehmood
    344-347页
    查看更多>>摘要：Thin films of organic semiconductor based azo-dye, OD 25, of the average thickness, ～750 ± 10 nm, were desposited successfully on the glass substrate for gas sensing applications. Electrical conductivity was of the film as measured by impedance spectroscopy, showed an increase with frequency that was attributed to non-metallic nature of the film. Moreover, single conduction mechanism and negligible contact resistance showed good quality of the sensor film. Deposited film with Al and Ag electrodes showed good conductance when exposed to water and ethanol vapors.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Photo-assisted VOC Detection by Transparent pn Junction

    Yoshinobu NakamuraYusuke MoritaYasuhiro YoshidaSatoru Fujitsu...
    348-351页
    查看更多>>摘要：The p-NiO/n-ZnO transparent pn heterojunction is prepared by RF magnetron sputtering technique and processed into a chemical sensor element by photolithography pattering and chemical etching process. Forward biased p-NiO/n-ZnO heterojunction sensor can detect VOCs at room temperature and its gas sensitivity is extremely enhanced with the assist of deep UV light incidence. Even if the testing gas is thermodynamically stable such as aromatic VOC, the p-NiO/n-ZnO heterojunction sensor can detect it with the concert mechanism involving "electric" and "photo" assistance.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Synthesis and luminescence properties of non-doped long persistent phosphors : Mg_2SnO_4

    Akiko TorisakaHiroaki KanekoKentaro NomizuSho Abe...
    352-355页
    查看更多>>摘要：A white long persistence phosphor was synthesized in a single-phase of Mg_2SnO_4 which was synthesized by a solid-state reaction. This phosphor crystallized in an inverse spinel structure and showed a broad-band emission from 350nm to 700nm. The afterglow was observed upon the excitation by 254nm. A Li-doped Mg_2SnO_4 sample showed a higher photoluminescence intensity and a longer lifetime than the non-doped one.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Luminescence Properties of Y(P,V)O_4 Synthesized by Microwave Heating

    Ayano TodaKenji TodaTadashi IshigakiKazuyuki Uematsu...
    356-359页
    查看更多>>摘要：Eu~(3+) doped and undoped Y(P,V)O_4 phosphors were prepared using multi-mode and single-mode microwave oven operated at 2.45 GHz. In the case of the microwave heating method, the phosphor particles were non-aggregated. A homogeneous distribution of Eu ion was observed in the microwave synthesis. No sintering behavior found in the microwave heating may be attributed to a quite shorter heating time. The Eu~(3+) doped sample synthesized by microwave heating showed intense red emission under UV excitation.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Development of New Red Phosphor Na_3YSi_2O_7:Eu~(3+) for a white LED

    Shinichiro KousakaKenji TodaTadashi IshigakiKazuyoshi Uematsu...
    360-363页
    查看更多>>摘要：New red phosphors Na_3YSi_2O_7:Eu~(3+) was prepared by a conventional solid-state reaction. This silicate phosphor can be efficiently excited by near UV light, yielding an intense red emission. Under the excitation of near UV light, the emission intensity is higher than that of a commercial red phosphor Y_2O_2S:Eu~(3+).
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Photochromic Characteristics of Tungsten Trioxide Films Prepared by Electric Current Heating Using Tungsten Wire

    Takumi HagizawaTakayuki HonmaYuiehiro KurokiTomoichiro Okamoto...
    364-367页
    查看更多>>摘要：Tungsten trioxide films were deposited on the glass substrate by electric current heating method using tungsten wire in air. Applied voltages to the tungsten wire were increased at rates of 0.05, 0.5, 5 and 50 V/min. The resultant films consisted of particles. A particle size of the crystals increased with increasing voltage applying rate. The effects of an ultraviolet (UV) irradiation on the reflectance of the films were investigated. The reflectance in the wavelength range of 500 - 2500 nm decreased by the irradiation. When the films were left in dark after the irradiation, the reflectance returned to the initial. With increasing voltage applying rate, absorption peak shifted toward longer wavelength in the region of 1250 - 1500 nm and the peak intensity decreased.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Electrical properties of dye-sensitized solar cells prepared by blending SnO_2 micro particles and TiO_2 nano particles

    Takahiro NakamuraYoshihiro NakataniTakashi OgiharaHajime Horikawa...
    368-371页
    查看更多>>摘要：Conductive SnO_2 powder was synthesized by ultrasonic spray pyrolysis and was blended with TiO_2 nano particles in order to improve the conductivity of TiO_2 porous films used in dye-sensitized solar cells. However, the conductivity of the films decreased because of the exposure of SnO_2 to high temperature during synthesis and calcination.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    Piezoelectric Ceramics for High Temperature Applications

    Yukio HIGUCHIHirozumi OGAWADaisuke KURODAMasahiko KIMURA...
    375-380页
    查看更多>>摘要：Ceramic materials based on lead titanate, lead niobate and bismuth layer-structured ferroelectrics (BLSF) were studied to develop piezoelectric ceramics for high temperature sensor applications. Compositional modification enabled lead titanate and lead niobate type ceramics to exhibit good piezoelectric properties at 500℃ . The Curie temperature for one BLSF, CaBi_4Ti_4O_(15) was close to 800℃, though the piezoelectric constant was smaller than those of lead titanate and lead niobate ceramics. These ceramics seem to be good candidates for use as high temperature sensor materials.In addition, textured SrBi_2Nb_2O_9 (SBN), another BLSF. ceramics with various orientation factors were fabricated through the templated grain growth (TGG) method. The resonant frequency of 76% textured SBN varied linearly with temperature and exhibited stable temperature characteristics. The temperature coefficient of the resonant frequency was -0.85 ppm/℃ from -50 to 250℃, and was smaller than that of a quartz oscillator. Therefore, textured SBN ceramics are suitable for use as a resonator material when stable resonant frequency is needed in a high temperature range.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd

    IMPROVEMENT OF ELECTROMECHANICAL COUPLING FACTOR AND MECHANICAL QUALITY FACTOR IN PZT-PMN CERAMICS BY MnO_2 ADDITION

    Rungnapa TipakontitikulAmporn KamonlertSukum EitssayeamAnuson Niyompan...
    381-384页
    查看更多>>摘要：PZT-PMN ceramic system with presence of MnO_2 contents were proposed and prepared using conventional sintering method as for piezoelectric transformer application. Phase formation and several dielectric and piezoelectric parameters were studied as a function of MnO_2 concentration. The x-ray diffraction study revealed the tetragonal symmetry for all samples with MnO_2 doping. To determine polarization, the P-E hysteresis loop were produced and the results indicated that entering of Mn~(4+) ions in the ceramic structure created large amount of oxygen vacancies and the consequent was observed as displacement of the loops to E axis. The obtained optimum parameter are d_(33) = 119 pC/N, k_p = 0.207, Q_m = 1669, tan δ = 0.0101, P_r = 20 μm/cm~2 and E_c = 10 kV/cm.
      原文链接:
    • NETL
    • NSTL
    • Trans Tech Publications Ltd